Home |  Imprint |  Privacy | Sitemap
You are here: SITA Process Solutions » Information & Service » FAQ » SITA clean line system

FAQ - SITA clean line process instruments

SITA clean line ST

Process tensiometer for controlling the surfactant/wetting agent concentration

To which measuring values can you compare the measuring data of the process instruments?

The measuring values of the process tensiometer are comparable to the measuring data of all SITA tensiometers because they are based on the same measuring method and contain an identical construction of the sensor.

With what kind of material does the sample get in contact with?

The sample gets in contact with high quality steel, PEEK, PTFE, Viton and PA6. For special application it is also possible to use other materials which is important for the traceability of the samples.

Automatic dosage?

Customer-specific interfaces allow the control of the dosage-pumps or the communication with an SPS. Furthermore, SITA Messtechnik GmbH gives you expert advice on using our instruments, adjusting the application and we do put the device into operation.

Maintenance?

The measuring device is designed for fully automated use at high operational reliability which is an additional advantage to hand-held and laboratory measuring devices. The cleaning process of the device happens independently with water before every automatic calibration. For cleaning the capillaries and the measuring vessel the device uses an integrated automatic supersonic.

Data storage?

The measuring values and parameters can be read off the device and i.e. passed on to the customer's control via current interfaces. All measuring values and their conditions under which they got extracted are saved in the device for at least one year. A serial port on the device makes it possible to read out the data with a PC.

SITA clean line CI

Monitoring the cleanliness of parts atline

To which measuring values can you compare the measuring data of the process instruments?

The measuring values of SITA clean line CI are directly comparable to those of the hand-held tensiometer SITA CleanoSpector because both devices are based on the same measuring method.

Data storage?

All measuring values and parameters can be read off and adjusted on the device. According to customer requirements the measuring values are either saved within the measuring system and/or passed on to the customer's control.

SITA clean line BC

Monitoring of bath contamination

To which measuring values can you compare the measuring data of the process instruments?

The measuring values of SITA clean line BC are directly comparable to those of the hand-held tensiometer SITA ConSpector because both devices are based on the same measuring method.

Data storage?

All measuring values and parameters can be read off and adjusted on the device. According to customer requirements the measuring values are either saved within the measuring system and/or passed on to the customer's control.

 

Your Notepad

No publications selected.

Literature recommendation

No topic related literature was found.

Accreditation

© SITA Process Solutions 2019

A business unit of SITA Messtechnik GmbH.

LinkedIn SITA
ERFE Logo